This machine is a must for the truly professional machine station. The effect of this equipment is phenomenal. It is extremely easy to operate and provides great control engineer.

This is a simpler version of Contractor . The has a sjubanks hydraulic valve box with a whole essentially the same functions as Contractor . Model suitable for large-scale agriculture or small machine stations. For this machine are poles directing instrument as an option. Machine well suited for large-scale farms or smaller machine stations.

Economic but fully capable postdriver for farmers. 380-pound hammers filled with molten cast iron can be well-ram heavy corner posts.

Postdriver with enhanced 380-pound hammer farmers. A machine with high impact could easily crush the worst corners and gate posts. Three bank high flow valve for exactly hammer control. Pole sleeve slides on a static mast allowing much higher power hammer.

Ideal machine for fencing touchdown on Agriculture; this machine allows high mast movement in four directions. This movement makes it possible for operators to have complete control over the pole which is turned down. Pole can be drawn or turned in all four directions. The standalone system mesh sleeve enables significantly higher power hammer under extreme conditions, there is no risk that the cap lifts off the post. Can knock down poles is up to 3.3 m and 375 mm in diameter.

Postdriver for large-scale farming or less power stations. This postdriver has no limits in the case of lateral connections. It can up to 30 degrees in both directions.

Postdriver for power stations, very robust build, a machine that is virtually impossible to destroy. The early models of this machine manufactured for almost 20 years ago are still in use than today. Can knock down poles that are up to 3.3 m and 375 mm in diameter.

This postdriver are custom built to be connected to telescopic handlers. It is a very handy and flexible machine. To link to this postdriver is very fast: it takes approx. 10 seconds. Mastering The design is similar to model II +, with same range of lateral tilt. With this system poles can put down almost anywhere, through drains, up to walls, in ditches, among the branches and trees. Getting the imminent lines are no problem for this machine.

Mini excavators additive (3 tonnes of A-6 tons, some models). This equipment turns your mini excavators to a very flexible and extremely efficient fencemachine. This is a highly-operated machine mounted on a steering shaft, which can swivel 360 degrees and has 600 millimeter in lateral displacement, mast tilt 25 degrees to the right and left. Tilt forward and backward achieved by rail and gravarm combined. Clearing the fence streets while you work, clear removing obstacles, dig up rocks, buried underlying cables and knock down poles. A complete all-in-one system. No posts escape this machine. To access the most consistent response to gang conditions are a breeze for this equipment.